Faceplate Installation - Regency Fireplace Products Horizon HZO42-NG Owners & Installation Manual

FACEPLATE INSTALLATION

Remove the protective coating from the faceplate before installation - see
handling instructions in panel install section.
1) To install the faceplate - line up the tabs on the faceplate with the 'C'
shaped openings on the left and right sides of the unit. There are 3
slots on each tab so the faceplate to accommodate different finishing
materials.
2) Install logo onto faceplate.
3)
For installations where thicker finishing material is used - the optional
trim piece may be installed to fill the gap.
Install the trim between the bottom access panel and the faceplate as
shown below.
4)
To remove - reverse steps.
Regency Horizon® HZO42 Gas Fireplace
installation
Trim Piece
Final Install
|
29
| 29