Volcanic Stone Installation - Regency Fireplace Products Horizon HZO42-NG Owners & Installation Manual

OPTIONAL VOLCANIC/GARDEN STONES INSTALLATION ON BURNER

VOLCANIC STONE INSTALLATION

Evenly spread the glass crystals and volcanic stones over the burner. Ensure the stones do not overlap too much as this will effect the fl ame
pattern.
IMPORTANT NOTE:
Only the supplied approved Volcanic Stones are to be used with these fi replaces. Use of any other type of stones can alter the unit's performance,
any damage caused by the use of any unapproved glass or stones will not be covered under warranty.
When using Volcanic Stones DO NOT cover burner ports or pilot light that lead to pilot fl ame. Ensure the stones do not overlap excessively as this
will effect the fl ame pattern.
OUTDOOR VOLCANIC STONE BURNER PACKAGES
Unit
HZO42/HZO42 (AUS)
PTO30 */ Plateau Series 50 stones w/5lbs glass
PTO60
NOTE: * Basalt Volcanic stones are measured by weight not quantity. Each bag contains 15lbs
of stones, however the exact quantity and size will vary.
Size varies between 2" - 3".
Volcanic Stones + Glass Crystals
For the PTO30, PTO60
& Plateau Series only
919-050
Volcanic Stones
Ivory/Tan
35 stones w/3lbs glass
100 stones w/10lbs glass
Volcanic Stones
Slate/Grey
35 volcanic stones w/3lbs glass 50 garden stones w/3lbs glass (AUS Only)
50 volcanic stones w/5lbs glass
100 stones w/10lbs glass
Volcanic Stones Ivory /Tan + Glass Crystals
Volcanic Stones Slate /Grey + Glass Crystals
1
installation
White Garden Stones
For the HZO42 & HZO42AUS
only
For the HZO42 & HZO42AUS
only
Regency Horizon® HZO42 Gas Fireplace
|
25
06/27/11
| 25