Regency Fireplace Products Horizon HZO42-NG Owners & Installation Manual
Horizon hzo42 outdoor gas fireplace
Hide thumbs
Also See for Horizon HZO42-NG:
- Owners & installation manual (44 pages) ,
- Owners & installation manual (52 pages)
Table of Contents
Advertisement
Quick Links
Regency Horizon
www.regency-fi re.com
WARNING:
If the information in these instructions are not followed exactly,
a fi re or explosion may result causing property damage,
personal injury or loss of life.
FOR YOUR SAFETY
Do not store or use gasoline or other fl ammable vapours and
liquids in the vicinity of this or any other appliance.
Installation and service must be performed by a qualifi ed
installer, service agency or the gas supplier.
WARNING:
Improper installation, adjustment, alteration, service or maintenance can cause injury or property
damage. Read the installation, operating and maintenance instructions thoroughly before installing
or servicing this equipment.
Tested by:
918-882f
FPI FIREPLACE PRODUCTS INTERNATIONAL LTD. 6988 Venture St., Delta, BC Canada, V4G 1H4
HZO42 Outdoor
™
Gas Fireplace
Installer: Please complete the details on the back cover
and leave this manual with the homeowner.
Homeowner: Please keep these instructions for future reference.
Installation Manual
MODELS: HZO42-NG
WARNING: FOR OUTDOOR USE ONLY
FOR YOUR SAFETY
What to do if you smell gas:
Do not try to light any appliance
Do not touch any electrical switch:
do not use any phone in your
building.
Immediately call your gas supplier
from a neighbour's phone. Follow
the gas supplier's instructions.
If you cannot reach your gas
supplier, call the fi re department.
Owners &
HZO42-LP
Horizon HZO42 Product Video
09/11/13
Advertisement
Table of Contents
Related Manuals for Regency Fireplace Products Horizon HZO42-NG
Summary of Contents for Regency Fireplace Products Horizon HZO42-NG
- Page 1 Owners & Regency Horizon HZO42 Outdoor ™ Installation Manual Gas Fireplace MODELS: HZO42-NG HZO42-LP Horizon HZO42 Product Video WARNING: FOR OUTDOOR USE ONLY www.regency-fi re.com WARNING: FOR YOUR SAFETY If the information in these instructions are not followed exactly, What to do if you smell gas: a fi...
- Page 2 To the New Owner: Congratulations! ® You are the owner of a state-of-the-art Gas Fireplace by REGENCY . The Horizon™ HZO42 Outdoor fi replace has been designed to provide you with all the warmth and charm of a fi re at the fl...
-
Page 3: Table Of Contents
TABLE OF CONTENTS SAFETY LABEL First Fire ..............31 Aeration Adjustment ............31 Copy of Lighting Plate Instructions ......32 Copy of Safety Decal .............4 MAINTENANCE DIMENSIONS Maintenance Instructions..........33 Unit Dimensions ............5 Valve assembly Replacement ........34 INSTALLATION PARTS Important Message ............6 Main Assembly ............37 Before You Start ............6 Burner Assembly ............38 General Safety Information..........6... -
Page 4: Safety Label
SAFETY LABEL This is a copy of the label that accompanies each HZO42 Outdoor Fireplace. We have printed a copy of the contents here for your review. NOTE: Regency ® units are constantly being improved. Check the label on the unit and if there is a difference, the label on the unit is the correct one. -
Page 5: Dimensions
DIMENSIONS UNIT DIMENSIONS 37 - 13/16” (960mm) 41 - 11/16” (1059mm) 43 - 11/16” (1110mm) 39 - ½” (1003mm) 16 - 1/8” (410mm) 15 - 9/16” (395mm) 35 - 1/4” (895mm) 13 - 3/4” (349mm) 5/8” (16mm) Regency Horizon™ HZO42 Gas Fireplace... -
Page 6: Installation
INSTALLATION IMPORTANT MESSAGE 5) To prevent injury, do not allow anyone who is DO NOT USE THIS APPLIANCE IF unfamiliar with the operation to use the fi replace. SAVE THESE ANY PART HAS BEEN UNDER WATER. IMMEDIATELY CALL A QUALIFIED 6) Wear gloves and safety glasses for protection INSTRUCTIONS while doing required maintenance. -
Page 7: Installation Checklist
INSTALLATION LOCATING YOUR INSTALLATION GAS FIREPLACE CHECKLIST 1) When selecting a location for your fi replace, ensure that the clearances are met. 1) Locate appliance: 2) This appliance must be installed in an open-air situation with natural ventilation, without stagnant a) Refer to "Locating Your Gas fi... -
Page 8: Outdoor Appliance Installation Summary
INSTALLATION IMPORTANT INFORMATION FOR OUTDOOR FIREPLACE INSTALLATIONS IMPORTANT THINGS TO REMEMBER • Never insulate around the body of the unit • Excessive heat retention in the fi rebox will lead to component failure • Correct Working Gas pressure is critical on “E” units and fi... -
Page 9: Minimum Clearances To Combustibles
INSTALLATION MINIMUM CLEARANCES TO COMBUSTIBLES The clearances listed below are Minimum distances unless otherwise stated: A major cause of fi res is failure to maintain required clearances (air space) to combustible materials. It is of the greatest importance that this fi... -
Page 10: Framing Dimensions
INSTALLATION FRAMING DIMENSIONS Framing Description HZO42 Dimensions Header Height 32-11/16” (30mm) Side Stud Width 42 - 3/16" (1072mm) Minimum framing depth 20" (508mm) Minimum Height to Combustibles 52 - 1/2" (1334mm) Minimum framing width 60" (1524mm) Corner Wall Depth 40 - 7/16" (1027mm) Corner Facing Wall Width 54 - 3/16"... -
Page 11: Mantel Clearances
INSTALLATION MANTEL CLEARANCES Due to the extreme heat this fi replace emits, the mantel clearances are critical. Combustible mantel clearances from 12" (305mm) top of front facing are shown in the diagram on the right. Combustible Material Note: Ensure the paint that is used on the mantel and the facing is "heat resistant"... -
Page 12: Finishing
INSTALLATION FINISHING IMPORTANT FINISHING DETAIL NOTE: Before placing unit into fi nal position - it is important to know the total thickness / height of fi nished hearth. The base of the fi replace should be level or higher than the fi nished hearth height. If material such as brick, stone, etc extends past the faceplate depth (1-1/2"), when fi... -
Page 13: High Elevation
INSTALLATION PILOT ADJUSTMENT 880 S.I.T. VALVE HZO42 SYSTEM DATA DESCRIPTION Max. Supply Pressure 14" WC (3.49 kpa) Periodically check the pilot fl ames. Correct fl ame Min. Supply Pressure 5" WC (1.25 kpa) pattern has two strong blue fl ames: 1 fl owing Manifold Pressure 3.5"... -
Page 14: Unit Assembly Prior To Installation
INSTALLATION UNIT ASSEMBLY PRIOR TO INSTALLATION NAILING STRIPS The 6 Standoffs must be correctly positioned and attached before unit is slid into position. The nailing strips come attached to the unit. There is 1 plate on each side and 1 on the top that can be folded out as required. Secure the top and side nailing strips to the framing. -
Page 15: Drain Installation (Recommended)
INSTALLATION DRAIN INSTALLATION (RECOMMENDED) Although this fi replace is designed to operate outdoors safely, rain and other sources of moisture may enter the hearth area, which will cause water to col- lect inside the base of the unit. To prevent excessive water collection, the installer must provide a way to drain the water from the base of the unit by building or installing a water collector before positioning the fi... -
Page 16: Wall Switch And Battery Installation
INSTALLATION WALL SWITCH AND BATTERY INSTALLATION (INCLUDED WITH UNIT) The unit comes with low voltage wire and a battery extension wire installed. 6) Install supplied 4-AA batteries into the battery holder. Using velcro install battery holder to the backside of the battery compartment door. Connect 1) Run supplied wire to desired location - to a max. -
Page 17: Wiring Diagram
INSTALLATION WIRING DIAGRAM This heater does not require a 120V A.C. supply for operation. (Do not cut the ground terminal off under any circumstances.) NOTE: 4 AA batteries must be installed in the battery pack to operate the burner switch. Profl... -
Page 18: Inner Panel Installation
INSTALLATION INNER PANEL INSTALLATION Before installation, panels must be handled and cleaned as per instructions noted below: Stainless Steel Panels • Stainless panels must be inspected for scratches and dimples prior to installation. All claims to be recorded at this time. Claims for damage after installation will not receive consideration. -
Page 19: Glass Crystal Installation
INSTALLATION GLASS CRYSTAL INSTALLATION Spread the Glass Crystals or Stones evenly over the burner. Ensure the crystals/stones do not overlap excessively as this will affect the fl ame pattern. IMPORTANT NOTE: Only the supplied approved Glass Crystals and Stones are to be used with these fi replaces. Use of any other type of glass crystals or stones can alter the unit's performance, any damage caused by the use of any unapproved glass or stones will not be covered under warranty. -
Page 20: Volcanic Stone Installation
INSTALLATION VOLCANIC STONE INSTALLATION Evenly spread the glass crystals and volcanic stones over the burner. Ensure the stones do not overlap too much as this will effect the fl ame pattern. IMPORTANT NOTE: Only the supplied approved Volcanic Stones are to be used with these fi replaces. Use of any other type of stones can alter the unit's performance, any damage caused by the use of any unapproved glass or stones will not be covered under warranty. -
Page 21: Optional Log Set Installation
INSTALLATION OPTIONAL LOG SET INSTALLATION Installation of Refl ective Panels must be completed before installing the log set. Read the instructions below carefully and refer to the images. If the logs are broken do not use the unit until they are replaced. Broken logs can interfere with pilot operation. - Page 22 INSTALLATION 4) Install log D on the burner as shown below. Orient log D across log E in the same way and in a similar position as depicted in Diagram 5- log D will rest up against the back panel. Diagram 5 5) Install log F on the right side of the burner as shown below.
-
Page 23: Heat Defl Ector Installation
INSTALLATION HEAT DEFLECTOR INSTALLATION 1) Install the heat defl ector to the top inside of the fi rebox with 4 screws as shown below. Heat Defl ector Heat Defl ector Installed Regency Horizon™ HZO42 Gas Fireplace... -
Page 24: Faceplate Installation
INSTALLATION FACEPLATE INSTALLATION Remove the protective coating from the faceplate before installation - see For installations where thicker fi nishing material is used - the optional handling instructions in panel install section. trim piece may be installed to fi ll the gap. Install the trim between the bottom access panel and the faceplate as To install the faceplate - line up the tabs on the faceplate with the 'C' shown below. -
Page 25: Glass Wind Shield Installation
INSTALLATION GLASS WIND SHIELD INSTALLATION 1) To install the glass wind shield - slot it into the space between the burner tray cover and the bottom access panel. Burner Tray Cover Glass Wind Shield Bottom Access panel WEATHER COVER INSTALLATION / REMOVAL 1) The unit should be covered when not in use for extended periods of time. - Page 26 INSTALLATION ASSEMBLY INSTRUCTIONS FOR A STEEL STUD FRAMING KIT FOR HZO42 Follow these instructions to construct a steel stud frame for the Outdoor fi replace; Overall dimensions = 60" W x 20" D x 52-1/2" H. **Non-combustible fi nishing board not supplied with kit. Board may be purchased at your local hardware/building supply store. Tools Required 1 power drill...
- Page 27 INSTALLATION 1) Place top/bottom (A) on the ground - fl at side down. Bend 3) Line up the screw holes of (A) with (B). Secure the tabs up to a 90° angle. each (B) with 2 wafer screws (one on each side) as shown below.
- Page 28 INSTALLATION 6) Manoeuvre remaining (B) pieces and position in each corner 9) Position remaining 2 - (C) pieces offset from center rib as of the frame - fl at side facing out - see 2 diagrams below. shown below. 10) Position (D) on top of (C) pieces - line up screw holes and secure (D) to (C) with 12 wafer screws.
- Page 29 INSTALLATION 12) LIne up screw holes on (E) (header) and (B) (inner vertical 14) Line screw holes on 1 (F) (corner brace) with (B) + (A) and support). Secure with 2 wafer screws on each side (4 total) secure with 4 wafer screws. as shown below. as shown below.
- Page 30 INSTALLATION REMOTE PROPANE / LP GAS ENCLOSURES INSTALLATION GUIDELINES If the unit is permanently connected to a gas piping system • Bottom opening must provide a minimum of 1/2 from a remote supply tank, installation must be in accor- square inches (3.23 cm²) for each pound of pro- dance with local codes or, in absence of local codes, with the pane/LP contained in the tank (see example be- National fuel Gas codes ANSI Z223/1.NFPA 54.
-
Page 31: Operating Instructions
OPERATING INSTRUCTIONS INSTALLATION OPERATING FIRST FIRE AERATION INSTRUCTIONS ADJUSTMENT The fi rst fi re in your fi replace is part of the paint curing process. To ensure that the paint is properly 1) Read and understand these instructions before Open the air shutter for a blue fl ame or close for a cured, it is recommended that you burn your fi... -
Page 32: Copy Of Lighting Plate Instructions
OPERATING INSTRUCTIONS COPY OF LIGHTING PLATE INSTRUCTIONS The lighting plate is located on the underside of the front access panel in the unit. A) This appliance is equipped with an ignition device which automatically lights the pilot. FOR YOUR SAFETY READ BEFORE LIGHTING Do not try to light the pilot by hand. -
Page 33: Maintenance
MAINTENANCE MAINTENANCE INSTRUCTIONS 1) Always turn off the gas valve and unplug the batteries before cleaning. For relighting, refer to lighting instructions. Keep the burner and control compartment clean by brushing and vacuuming at least once a year. When cleaning the logs, use a soft clean paint brush as the logs are fragile and easily damaged. 2) Clean appliance with a damp cloth (never when unit is hot). -
Page 34: Valve Assembly Replacement
MAINTENANCE VALVE ASSEMBLY REPLACEMENT 1) Turn the unit off and allow it to cool down to room temperature. 9) Remove the front access panel by lifting up and out. 2) Turn off the gas supply to the unit. 3) Remove trim. 4) Remove the faceplate by lifting it up and off the unit. - Page 35 MAINTENANCE 12) Slide the burner to the right and lift up and out of the fi rebox. 13) Remove 6 screws in locations shown below to access DFC. 6th screw located at back 14) Remove 6 screws an lift out valve tray. 16) Replace with new valve tray and reverse steps.
- Page 36 MAINTENANCE DIGITAL FIREPLACE BURNER CONTROL REMOVAL 5. Disconnect the Black sparker wire with black spade connector from CN3. Remove 6 screws in locations shown below to access DFC. See Diagram 2 below. 6th screw located at back Diagram 2 Sparker Wire 6.
-
Page 37: Main Assembly
PARTS LIST Part # Description MAIN ASSEMBLY 326-028 Pilot Hood 1) 326-552 Faceplate Assembly 326-036 Top nailing strip 326-037/F Side nailing strip 2) 326-009 Heat Defl ector 3) 940-368/P Wind Shield 4) 326-525 Burner Assembly NG 948-223 Logo Plate 326-525 Burner Assembly LP 326-940 Weather Cover... -
Page 38: Burner Assembly
PARTS LIST BURNER ASSEMBLY Part # Description Part # Description 326-525 Burner Assembly NG 904-777 Orifi ce #29 NG 326-525 Burner Assembly LP 904-434 Orifi ce #47 LP 10) 911-024 Valve NG SIT 880 326-930 Log Set 911-025 Valve LP SIT 880 11) 326-008 Burner Tray Cover 12) 911-006... -
Page 39: Accessories
PARTS LIST ACCESSORIES Part # Description 13) 326-907 Refl ective Stainless Steel Inner Panels 14) 940-368/P Glass windshield 15) 326-552 Faceplate Brushed Stainless 946-676 Copper Glass Crystals 946-695 Garden Stones Regency Horizon™ HZO42 Gas Fireplace... - Page 40 NOTES Regency Horizon™ HZO42 Gas Fireplace...
- Page 41 NOTES Regency Horizon™ HZO42 Gas Fireplace...
- Page 42 NOTES Regency Horizon™ HZO42 Gas Fireplace...
-
Page 43: Warranty
WARRANTY ® Regency Fireplace Products are designed with reliability and simplicity in mind. In addition, our internal Quality Assurance Team carefully inspects each unit thoroughly before it leaves our facility. FPI Fireplace Products International Ltd. is pleased to extend this limited warranty to the original purchaser of a Regency ®... - Page 44 ® Register your Regency warranty online www.regency-fi re.com Reasons to register your product online today! • View and modify a list of all your registered products. • Request automatic email notifi cation of new product updates. • Stay informed about the current promotions, events, and special offers on related products.
Need help?
Do you have a question about the Horizon HZO42-NG and is the answer not in the manual?
Questions and answers