Take-Off; Climb; Cruising - Rotax 912 Series Operator's Manual

3.6) Take-off

Climb

3.7) Cruising

Performance
Oil temperature
Effectivity: 912 Serie
Edition 4 / Rev. 0
NOTE
Cycling the propeller governor puts a relatively high load on the
engine. Unnecessary cycling or additional checks should be
avoided.
Non-compliance can result in serious injuries or death!
Monitor Operating limits. Limits must not be exceeded.
Climbing with engine running at take-off performance is permis-
sible (max. 5 minutes).
See Chapter 2.1 Operating limits
Step Procedure
1 Set performance as per performance specifications
Chapter 5
2.1 Operating
Step Procedure
1 Avoid operation below normal operation oil temperature
(90 to 110 °C / 194 to 230 °F), as possible formation of
condensation water in the lubrication system badly influ-
ences the oil quality.
To evaporate possibly accumulated condensation water,
at least once a day 100 °C (212 °F) oil temperature must
be reached.
BRP-Rotax
m WARNING
and respect operating limits as per
limits.
Chapter
Page 3-9
November 01/2016