Hpe Storeonce Systems; Hpe Storeonce 5500 System - HPE StoreOnce 3100 Installation And Configuration Manual

Task
9 Configure email.
10 Configure SNMP.
11 Apply the SSL certificate.
12 If necessary, expand storage.
13 Check software version.
14 Configure Remote Support via STaTS.
15 Configure the network.
16 Configure Fibre Channel.
17 Complete configuration.
18 Use the StoreOnce CLI to run a confidencecheck
report on the system.

HPE StoreOnce Systems

HPE StoreOnce 5500 System

Table 2: HPE StoreOnce 5500 System
Storage capacity
Storage Expansion Options
StoreOnce Optional Hardware
8 HPE StoreOnce Systems
Refer to
Setting up StoreOnce email alerts on page
43
Setting up SNMP (Simple Network
Management Protocol) on page 46
Generating the SSL certificate on page
49
Expanding storage capacity, if supported
on page 50
Checking for the latest software on page
53
Configuring Remote Support on page 31
Complete network configuration on page
55
Fibre Channel with StoreOnce Systems on
page 84
Additional configuration tasks on page
63
Running a StoreOnce system confidence
check on page 64
60 TB (11 x 4 TB disks + 4 hot spare)
Maximum capacity = 1120 TB
There are two options:
Add up to five 44 TB Capacity Upgrade disk packs
(containing eleven 4 TB disks) to each enclosure
Add up to three 60 TB Capacity Upgrade disk
enclosures (containing eleven 4 TB disks + 4 hot
spare)
Four PCIe slots are available for 10 GbE Network
and FC PCIe cards.
See Optional PCIe cards on page 76.