Interacoustics AA222 Additional Information page 52

AA222 Additional Information
1. Open the program Paint from the program accessories
folder.
2. Open Image Properties using the shortcut Ctrl + E
Set width to 945 and height to 190 as illustrated above.
3.
Click OK.
4. Edit the image and the company data to fit inside the
set area.
5. Save the created file as PrintLogo.bmp
Zip the PrintLogo.bmp file to the following name format
6.
update_user.logo.bin
The update_user.logo.bin file is now ready to be used.
Insert a USB thumb drive with at least 32MB in total
size.
8. Go to My Computer, right-click the USB thumb drive
and select Format
CAUTION
9. Ensure that FAT32 is selected as your File system -
leave other settings as listed.
10.
Click Start - depending on the size of your thumb drive
this may take a moment. When the formatting is
complete, you will receive a pop-up confirming
successful formatting.
11. Copy the update_user.logo.bin file to the formatted
thumb drive.
12. It is very important that this USB thumb drive is used
for this file only.
13. With the audiometer switched off, insert the thumb
drive into any available USB port.
14. Then switch on the instrument and push the
Temp/Setup option from the Tone test screen.
This action will erase everything on
your USB thumb drive
Page 48