Designing A Customised Print Template - Interacoustics AA222 Additional Information

AA222 Additional Information
7.3.3

Designing a customised print template

After clicking on the New Template (or Edit Template) button, the design window below is displayed. On the
left of the screen, you will see the elements which you can add to the layout. These are ordered by their
corresponding test module. For example, everything for input into the print template associated with the AUD
module, can be found under AUD.
1. On opening, a short description about how to create a template will show on the screen. Press Close to
close the message box. Uncheck the Show hints checkbox, if you do not want this message to appear
again.
2. This list shows the elements which can be dragged onto the blank template. Selecting General provides
a list of the general elements. Template elements for each module are listed when selecting the
relevant module name, for example AUD, IMP, REM, HIT. If other suites are installed, such as the
Titan suite, the relevant suites will also be displayed.
The handling and options for the different elements are discussed in a separate section below.
3. The taskbar includes numerous icons for customizing the elements that are dragged onto the blank
template page. These are described in the following section.
Page 53