Interacoustics AA222 Additional Information page 22

AA222 Additional Information
License
A
AUD key. When pressing the
a new license key for the audiometry module. The new license key is activated by pressing the
button. The previous license key will not be changed if the new key is not a valid key.
B
IMP key. When pressing the
new license key for the impedance module. The new license key is activated by pressing the
button. The previous license key will not be changed if the new key is not a valid key.
Light
C
You can alter the Display light by holding the
see the brightness of your screen change accordingly.
D
You can alter the LED light by holding the
the brightness of the LEDs around the Enter button change accordingly. Note that the LED in the
probe system cannot be adjusted.
Session settings
E Keep Session on Save will keep the session on the device when pressing save session.
System
F
When pressing the
date and time.
The following window will pop up
Use the wheel to select day, month, year, hour and minutes. Use the
buttons to adjust the number. Press the
and time, or press the
When the AA222 is connected to the Diagnostic suite, your PC automatically updates the date
and time.
Printer
G Under Printer type you can select which printer is connected to the USB port of your AA222. By
default, the Sanibel MPT-III thermal printer is selected. The list below shows the currently
supported printers:
H Under Printer color mode you can select your printer to print in black and white or 3 color
(CMY) or 4 color (CMYK) mode.
button a pop-up window opens in which you can enter
button a pop-up window opens in which you can enter a
button and rotating the wheel. You will see
button while Date and time is selected you can manually alter the
button to keep the changes and set the date
button to reject any changes made.
button and rotating the wheel. You will
and
Page 18