Manage Protocol Settings - Interacoustics AA222 Additional Information

AA222 Additional Information
4.2.3

Manage protocol settings

Hold the Setup button and rotate the wheel until you can select Manage protocols. A window pops up showing
the currently available protocols on your instrument. By default, all custom made protocols are displayed at the
top of the list and all factory default protocols are displayed at the bottom of the list.
The following buttons are available when the Manage Protocols window is open.
Press Delete to remove the protocol permanently from the instrument. You will be
asked to confirm this action. The delete function is not available for factory default
protocols.
The Hide/ Unhide buttons allow you to organize which protocols are visible when
pressing the Tests button.
By holding the Region button and rotating the wheel, you can choose which default
factory protocols are to be selected.
Press Back to close the Manage Protocols window.
Page 33