Interacoustics AA222 Additional Information page 23

AA222 Additional Information
Startup screen
I Selects the startup screen for either the Aud or Imp module.
In addition, the following buttons are available:
Pressing Install allows you to install new firmware on the AA222. By pressing Install
the instrument will look for a USB dongle. If there is one or more installation file
available, the installation process will then commence.
Holding the Language button and rotating the wheel (34/38) allows selection of one of
the available languages. Note that you must restart the system before the new
language setting can be used.
Press Exit to leave Instrument settings
Page 19