Table of Contents
Advertisement
By clicking the Calibration dates button, you can view the
last calibration date.
9.2.5
To calibrate the ASM-80x
Click the radio button Only measuring.
Use the check box list to select the inputs to be measured.
For A-models, only CJ-Comp. Can be selected.
Use the check box list to select the input types to be
measured.
Connect the reference signal source to the appropriate
channel when prompted.
Click Start and follow the instructions on screen.
The software starts measuring the first of the selected inputs.
Ensure that the correct reference signal source is connected
when prompted.
When all the selected inputs have been measured a new
dialogue appears.
125614 04
2017-08-11
45
Advertisement
Table of Contents
