Table of Contents
Advertisement
9.2.1
Installing the AMETRIM Software
The software comes on a CD-ROM and is ready to run – no
installation is required. Simply insert the CD-ROM and run the ATC-
adjustment program.
9.2.2
Connecting the PC and the ASM-80x
Caution...
1. Ensure that both the PC and the ASM-80x are switched
off at the mains. Failure to do so may result in your
equipment being damaged.
2. Connect the serial cable provided to the "RS 232" port on
the front of the ASM-80x and to the COM port on the PC.
3. Switch on the PC and the ASM-80x.
9.2.3
Starting the AMETRIM Software
Note...
Before starting this software, the PC and the ASM-80x
must be connected together and the ASM-80x switched on.
40
2017-08-11
125614
04
Advertisement
Table of Contents
