Table of Contents
Advertisement
B-models
The push buttons on the back of the B-models can only be used to
reset the instrument.
Press both push buttons down for two seconds and the multi-scanner
will reset itself.
5.2
Operation with JOFRACAL
Both A- and B-models are operated by means of the sensor test and
calibration software, AMETEK Denmark A/S JOFRACAL. The
program is included on the enclosed CD.
For introduction and use of the program, the user is advised to read
the user manual included on the CD. All possibilities and limits of the
program are described in the manual.
24
Push buttons for resetting
the instrument
ANALOG BUS
2017-08-11
IN
125614
04
Advertisement
Table of Contents
