Table of Contents
Advertisement
4.3
Cascading the multi-scanner
It is possible to connect up to 3 multi-scanners in series and build a
system, which enables you to measure up to 24 sensors
simultaneously.
The first multi-scanner to be placed after the PC can be either an A-
or a B-model. Succeeding multi-scanners have to be A-models. It is
not possible to connect multiple B-models in series.
When the DC power has been connected to the multi-scanners and
the proper RS232 connection has been established between all the
instruments, the LED's on channel 1 on all instruments involved will
flash simultaneously.
First model is a B-model, succeeding multi-scanners are A-
models
First model is an A-model, succeeding multi-scanners are A-
models
125614 04
2017-08-11
21
Advertisement
Table of Contents
