Table of Contents
Advertisement
2.0
Safety instructions
Read this manual carefully before using
the instrument!
Please follow the instructions and procedures described in
this manual. They are aimed at allowing you to make the
best of your multi-scanner and avoid any personal injuries
and/or damage to the instrument.
Disposal – WEEE Directive
The multi-scanner contains Electrical and Electronic
circuits and must be properly recycled or disposed of (in
accordance with the WEEE Directive 2012/19/EU).
Warning
The multi-scanner has been designed to calibrate and
measure low voltage signals. To ensure the safety of the
operator and the instrument, DO NOT connect the multi-
scanner to input voltages above 30 Volts.
To avoid possible electric shock or personal injury:
•
The multi-scanner must not be used for any purposes
other than those described in this manual, as it might
cause a hazard.
•
The multi-scanner has been designed for indoor use
only and is not to be used in wet locations.
•
Do not operate the multi-scanner in environments of
explosive gas, vapour, or dust.
•
The multi-scanner is not designed for operation in
altitudes above 2000 meters.
•
Only use the specified mains adaptor approved for the
voltage and plug configuration in your area.
•
Do not apply more than the rated voltage. See
specifications for supported ranges.
125614 04
2017-08-11
7
Advertisement
Table of Contents
