If the ASM-80x is not switched on or is not connected to the
selected port, then the software returns to the AMETRIM
adjustment software main menu.
As the software starts, it detects the type of instrument
connected to the PC and reads its serial number.
This information plus the COM port the calibrator is
connected to is displayed at the bottom of the AMETRIM
window.
If the calibrator is not switched on or is not one of the
models covered by this manual, then the software closes
automatically.
9.2.4
Run calibration/adjustment
This option allows you to check the accuracy of the ASM-80x
electrical inputs. You will require a calibrated reference signal source.
42
2017-08-11
125614
04