Table of Contents
Advertisement
5.0
Operating the multi-scanner
Warning
•
Do not use the multi-scanner if it operates abnormally.
Protection may be impaired. When in doubt, get the
multi-scanner serviced.
•
When servicing the multi-scanner, only use specified
replacement parts. There are no user serviceable parts
inside the multi-scanner.
5.1
Manual operation
A-models
Push buttons for manual channel shift
The push buttons on the back of the A-models can be used for
manual channel shift. When LED 1 is flashing no channel is selected.
These buttons will enable the user to operate the instrument without
using a connected computer.
Supplying transmitters is not possible during manual operation.
Press both push buttons for two seconds and the multi-scanner will
reset itself.
125614 04
CHANNEL SELECT
ANALOG BUS
IN
UP
DOWN
2017-08-11
OUT
23
Advertisement
Table of Contents
