Cisco ONS 15310-MA Troubleshooting Manual page 26

Alarm Procedures
If the condition does not clear, log into the Technical Support Website at
Step 2
http://www.cisco.com/cisco/web/support/index.html for more information or call Cisco TAC
(1-800-553-2447).
2.7.15 AS-MT-OOG
The Alarms Suppressed on an Out-Of-Group VCAT Member alarm is raised on an VC member of a
virtual concatenated (VCAT) group whenever the member is in the IDLE (AS-MT-OOG) administrative
state. This alarm can be raised when a member is initially added to a group. In IDLE (AS-MT-OOG)
state, all other alarms for the VC are suppressed.
The AS-MT-OOG alarm clears when an VC member transitions to a different state from IDLE
(AS-MT-OOG) or when it is removed completely from the VCAT group. It does not require
troubleshooting unless it does not clear.
If the alarm does not clear, log into the Technical Support Website at
http://www.cisco.com/cisco/web/support/index.html for more information or call Cisco TAC
(1-800-553-2447).
2.7.16 AUD-LOG-LOSS
The Audit Trail Log Loss condition occurs when the log is 100 percent full and the oldest entries are
being replaced with new entries. The log capacity is 640 entries. The log must be off-loaded using the
following procedure to make room for more entries.
Clear the AUD-LOG-LOSS Condition
In node view, click the Maintenance > Audit tabs.
Step 1
Click Retrieve.
Step 2
Click Archive.
Step 3
In the Archive Audit Trail dialog box, navigate to the directory (local or network) where you want to
Step 4
save the file.
Enter a name in the File Name field.
Step 5
You do not have to assign an extension to the file. It is readable in any application that supports text files,
such as WordPad, Microsoft Word (imported), etc.
Click Save.
Step 6
The 640 entries are saved in this file. New entries continue with the next number in the sequence, rather
than starting over.
Cisco ONS 15310-MA SDH Troubleshooting Guide, Release 9.0
2-26
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SDH Logical Objects: VCTRM-HP, VCTRM-LP
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SDH Logical Object: NE
Chapter 2 Alarm Troubleshooting
78-18663-01