Cisco ONS 15310-MA Troubleshooting Manual page 109

Chapter 2 Alarm Troubleshooting
Note
Step 3 If you prefer the card that physically occupies the slot but the card is not in service, does not have circuits
mapped to it, and is not part of a protection group, place the cursor over the provisioned card in CTC
and right-click to choose Delete Card.
The card that physically occupies the slot reboots, and CTC automatically provisions the card type into
that slot.
Note
If any ports on the card are in service, place them in locked condition by completing the following steps:
Step 4
Before placing ports out of service, ensure that live traffic is not present.
Caution
a. Double-click the reporting card to display the card view.
b. Click the Provisioning tab.
Click the Admin State column for any in-service ports.
c.
Choose locked, maintenance to take the ports out of service.
d.
If a circuit has been mapped to the card, complete the
Step 5
Before deleting the circuit, ensure that live traffic is not present.
Caution
Step 6 If the card is paired in a protection scheme, delete the protection group by completing the following
steps:
a. Click the Provisioning > Protection tabs.
b. Choose the protection group of the reporting card.
Click Delete.
c.
Right-click the card reporting the alarm.
Step 7
Choose Delete.
Step 8
The card that physically occupies the slot reboots, and CTC automatically provisions the card type into
that slot.
If the alarm does not clear, log into the Technical Support Website at
Step 9
http://www.cisco.com/cisco/web/support/index.html for more information or call Cisco TAC
(1-800-553-2447) in order to report a Service-Affecting (SA) problem.
78-18663-01
When you replace a card with the identical type of card, you do not need to make any changes
to the database.
If the card is in service, does have a circuit mapped to it, is paired in a working protection
scheme, has DCC communications turned on, or is used as a timing reference, CTC does not
allow you to delete the card.
"Delete a Circuit" procedure on page
Cisco ONS 15310-MA SDH Troubleshooting Guide, Release 9.0
Alarm Procedures
2-154.
2-109