Cisco ONS 15310-MA Troubleshooting Manual page 140

Alarm Procedures
2.7.227 TX-AIS
The Transmit (TX) Direction AIS condition is raised by the ONS 15310-MA SDH backplane when it
receives a far-end E1 LOS.
Clear the TX-AIS Condition
Determine whether there are alarms on the downstream nodes and equipment, especially the
Step 1
(STM)" alarm on page
Clear the downstream alarms using the applicable procedures in this chapter.
Step 2
If the condition does not clear, log into the Technical Support Website at
Step 3
http://www.cisco.com/cisco/web/support/index.html for more information or call Cisco TAC (1 800
553-2447).
2.7.228 TX-LOF
The Transmit Direction LOF condition is transmitted by the ONS 15310-MA SDH backplane when it
receives a E1 TX-LOF.
This alarm is raised only at the transmit (egress) side.
Clear the TX-LOF Condition
Complete the
Step 1
If the condition does not clear, log into the Technical Support Website at
http://www.cisco.com/cisco/web/support/index.html for more information or call Cisco TAC (1 800
553-2447).
2.7.229 TX-RAI
The Transmit Direction RAI condition is transmitted by the backplane when it receives a 15310-MA
SDH CTX, E1-21/DS3-E3-3, or E1-63/DS3-E3-3 E1 TX-AIS. This alarm is raised only at the transmit
side, but RAI is raised at both ends.
Cisco ONS 15310-MA SDH Troubleshooting Guide, Release 9.0
2-140
Default Severity: Not Reported (NR), Non-Service-Affecting (NSA)
SDH Logical Objects: E1
2-98, or OOS ports.
Default Severity: Not Reported (NR), Non-Service-Affecting (NSA)
SDH Logical Objects: E1
"Clear the LOF (E1) Alarm" procedure on page
Default Severity: Not Alarmed (NA)
SDH Logical Objects: E1, DS3
Chapter 2 Alarm Troubleshooting
2-86.
"LOS
78-18663-01