Cisco ONS 15310-MA Troubleshooting Manual page 106

Alarm Procedures
If the condition does not clear, log into the Technical Support Website at
Step 2
http://www.cisco.com/cisco/web/support/index.html for more information or call Cisco TAC
(1-800-553-2447).
2.7.151 MAN-REQ
The Manual Switch Request condition occurs when a user initiates a Manual switch request on an
STM-N port. Clearing the Manual switch clears the MAN-REQ condition. You do not need to clear the
switch if you want the manual switch to remain.
Clear the MAN-REQ Condition
Complete the
Step 1
If the condition does not clear, log into the Technical Support Website at
Step 2
http://www.cisco.com/cisco/web/support/index.html for more information or call Cisco TAC
(1-800-553-2447).
2.7.152 MANRESET
A User-Initiated Manual Reset condition occurs when you right-click a card in CTC and choose Reset.
MANRESET is an informational condition and does not require troubleshooting.
Note
2.7.153 MANSWTOINT
The Manual Switch To Internal Clock condition occurs when the NE timing source is manually switched
to an internal timing source.
MANSWTOINT is an informational condition and does not require troubleshooting.
Note
Cisco ONS 15310-MA SDH Troubleshooting Guide, Release 9.0
2-106
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SDH Logical Objects: VCMON-HP, VCMON-LP
"Initiate a 1+1/LMSP Manual Switch Command" procedure on page
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SDH Logical Object: EQPT
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SDH Logical Object: NE-SREF
Chapter 2 Alarm Troubleshooting
2-147.
78-18663-01