Allen-Bradley 2080-LC20-20QBB User Manual page 202

Appendix E Modbus Mapping for Micro800
192
Parameter numbers listed in this section are for a PowerFlex 4M and will be
different if you are using another PowerFlex 4-Class drive.
Parameter Name
Start Source
Speed Reference
Comm Data Rate
Comm Node Addr
Comm Loss Action
Comm Loss Time
Comm Format
• Connect the 1203-USB to the PowerFlex Drive and to the Computer.
• Launch Connected Components Workbench, Connect to the Drive and
set parameters.
To configure PowerFlex 4M, perform the following steps:
1. Double-click the PowerFlex 4M if it is not already open in Connected
Components Workbench.
2. Click Connect.
3. In the Connection Browser, expand the AB_DF1 DH+ Driver.
Select the AB DSI (PF4 Port) and click OK.
4. Once the Drive has connected and been read in, select the Start up wizard
and change the following items. Select Finish to save the changes to the
drive.
• Select the Comm Port as the Speed Reference. Set P108 [Speed
Reference] to 5 (Comm Port).
• Set Start Source to Comm Port. Set P106 [Start Source] to 5 (Comm
Port).
• Defaults for the remaining Inputs
• Accept Defaults for the remainder and click Finish.
5. Select Parameters from the Connected Components Workbench window.
Parameter Number
4M 4 40 40P
P106 P36
P108 P38
C302 A103
C303 A104
C304 A105
C305 A106
C306 A107
Rockwell Automation Publication 2080-UM005E-EN-E - March 2018
400 400N 400P
C103
C104
C105
C106
C102