Allen-Bradley 2080-LC20-20QBB User Manual page 168

Appendix C Quickstarts
158
5. Select the firmware revision you want to flash your Micro820 controller
with.
The list of firmware revisions are installed together with Connected
Components Workbench. If you require a revision that is not listed,
download the firmware from the Product Compatibility and Download
Center (PCDC) at
http://www.rockwellautomation.com/rockwellautomation/support/
pcdc.page
and install the included ControlFLASH kit.
You must sign in to the Rockwell Automation website before
IMPORTANT
downloading a firmware revision.
Close and relaunch Connected Components Workbench, then open the
SD Card Utility again. The revision should now appear in the list.
6. Click Transfer.
The file is copied to the microSD card.
7. Close the SD Card Utility and proceed to the next step to edit the
ConfigMeFirst.txt file.
Rockwell Automation Publication 2080-UM005E-EN-E - March 2018