Allen-Bradley 2080-LC20-20QBB User Manual page 100

Chapter 8 Using the Micro800 Remote LCD
90
Main Menu Items
Menu Item Description
I/O Status Shows the status of the local I/O.
Mode switch Change the mode switch selection.
Variables View and change the data value of a variable. Using Connected Components
Workbench software, you can specify which variables in the program can be
viewed and edited through the 2080-REMLCD module.
See View and Edit Variable Values through the Remote LCD on page
Security Activate, deactivate and change password protection.
Advanced Set System Info
Fault Code
LCD Setup
Clock Setup
Language
Analog Calibration
PwrUp Behavior
Memory Card
ENET Cfg
The controller limits certain operations according to controller mode, as shown
in the following table.
Operational Limit on 2080-REMLCD
Operation
Variable Edit
Analog Calibration
Controller → Memory Card
Memory Card → Controller
Others
View and Edit Variable Values through the Remote LCD
Go to the 2080-REMLCD configuration window in Connected Components
Workbench. Click LCD Variables and select which variables you would like to
edit through the Remote LCD.
View system information such as operating
systems series and firmware revision.
View controller fault code information.
Adjust LCD contrast, backlight color and
push button.
The real-time clock and daylight saving time.
Change menu language to French, Italian,
Spanish, and Chinese.
Configure calibration parameter of embedded
analog inputs.
Configure controller mode on powerup.
Access the microSD card.
View and change the Ethernet port configuration.
PROG Mode
NO
YES
YES
YES
YES
Rockwell Automation Publication 2080-UM005E-EN-E - March 2018
90.
RUN Mode
YES
NO
NO
NO
YES