Device Profile: Vendor-Specific Objects; Adapter Object - Siemens SIMATIC S7 EIP-200S System Manual

2.7

Device profile: vendor-specific objects

2.7.1

Adapter Object

The Adapter Object provides the external configuration and monitoring interface to the
EIP-200S Ethernet/IP Adapter.
Class code
Class attributes
Number of instances 1
Instance 1 attributes of the Adapter Object
Attribute Access rule Name
ID
1 Get
2 Get
3 Get
4 Get/Set
2
5 Get
6 Get
7 Get
8 Get/Set
2
9 Get/Set
2
10 Get/Set
2
11 Get/Set
2
12 Get/Set
2
13 Get/Set
2
14 Get/Set
2
15 Get/Set
2
16 Get/Set
2
17 Get/Set
2
18 Get/Set
2
19 Get/Set
2
EIP-200S Ethernet/IP Adapter Distributed I/O System
System Manual, 06/2018, A5E44345053-AB
0x64
No attributes are supported for the Adapter Object at the class level.
Data type
AdapterStatus USINT
InputSize USINT
OutputSize USINT
AutoConfig BOOL
ConfigChanged BOOL
Diagnostic String Array of USINT [65]
ConfiguredSlots USINT
HeadParameters Array of USINT [19]
IO_StatusEnable BOOL
HeadParamByte1 USINT
HeadParamByte2 USINT
HeadParamByte3 USINT
HeadParamByte4 USINT
HeadParamByte5 USINT
HeadParamByte6 USINT
HeadParamByte7 USINT
HeadParamByte8 USINT
HeadParamByte9 USINT
HeadParamByte10 USINT
EIP-200S Ethernet/IP Adapter
2.7 Device profile: vendor-specific objects
Data value
Adapter Status (see AdapterStatus details table).
Currently configured input assembly size.
Currently configured output assembly size.
Automatic Configuration mode
1: Automatic configuration: the rack self-configures
based on the modules installed (factory default).
0: Manual configuration: the rack configuration is
stored in nonvolatile memory.
True if manual configuration changes have been
made but have not taken effect.
An array of USINT containing slot diagnostics. The
first byte of the array indicates the number of valid
diagnostic bytes within the array (the remaining
bytes within the array can be ignored).
Indicates the number of configured slot objects.
Configuration information for the adapter module.
Enables the generation of an I/O status byte at the
beginning of the input data I/O packet.
Factory default = enabled.
Parameter bytes for electronic module and adapt-
er module behavior.
43