Installation - Njoy PWUP-LI060HR-AZ01B User Manual

Touch screen LCD Display
UPS Mode LCD Display
UPS Power
ON
AC Mode
When AVR is functioning,
a plug icon will flash
every second
Overload in
AC Mode
icon will flash
Battery
Mode
When battery level is low,
battery icon will flash
4
Description
When UPS is ON,
it will enter this
mode for 4
seconds
LCD information will
be displayedin the
following order when
LCD is touched:
1. Output voltage
2. Input voltage
3. Load level
4. Battery capacity
When overload
occures, alarm
will beep every 0.5
seconds.
Alarm will beep
every 10 seconds and
LCD information will
be displayed in the
following order when
LCD is touched:
1. Output voltage
2. Input voltage
3. Load level
4. Battery capacity
Overload
in Battery
Mode
icon will flash
NOTE: If backlight shuts off, you may activate it by touching
the screen.
3

Installation

The UPS can protect your equipment from all power
problems such as surge, blackouts, brownouts and line
noise. When AC power is present and the ON/OFF switch
is turned ON, the UPS is always charging the battery and
provides power to the equipment from AC line directly.
A reliable built-in battery can provide stable power in
order for you to complete your work, save your data and
safely shut down your system when there is a utility power
blackout.
The UPS is simple to operate and install. Please read the
following steps before connecting any equipments to this
UPS:
3.1 Connecting your equipment and first usage
Step 1.
Connect the UPS to a grounded AC power outlet.
When overload
occurs, alarm will
beep every 0.5
seconds.
5