Auto Restart - Njoy PWUP-LI060HR-AZ01B User Manual

CAUTION
Do NOT plug
LASER PRINTERS
into any of the
outlets.
Step 2.
Please turn ON the ON/OFF switch and charge the
battery at least 6 hours for a full load before you
start to use the UPS.
Step 3.
Plug your PC or peripheral equipment (printer, tv,
scanner, fax, speakers etc.) into the power outlets
of the UPS
(these will provide emergency battery
backup power during blackouts as well as surge
protection from surges and spikes).
powerfull sound sistems and woofers or non
computer-related
equipment, life-support equipment, microwave
ovens, or vacuum cleaners to the UPS !
Step 4.
Connect the phone line cables to the RJ-11 outlet.
3.2 General Specifications
ǘ Automatic voltage regulation
Regulates the input voltage and eliminates
the problems created by under-voltage or
over-voltage fluctuations. It also protects
6
Do NOT plug any
SURGE STRIPS
into any of the
outlets.
Do not attach
items, such as medical
against spikes and surges that comprise over
80% of power problems.
ǘ Auto restart
The UPS will restart automatically and will start
charging the batteries once the electricity is back
on.
ǘ Cold Start Function
When the UPS is OFF and there is no connection
to the power utility, it's still possible to start the
UPS unit using the remaining battery power.
4 Important Safety Warnings
Place the UPS indoors in an area that has adequate
airflow and no excessive dust. Do NOT allow the UPS
to be exposed to moisture, rain, excessive heat or
direct sunlight.
The use of the UPS is NOT recommended in life
support applications where failure of this equipment
can reasonably be expected or when its safety or
effectiveness could be affected significally.
Please always disconnect the input power cord from
the wall outlet before replacing the battery.
Do NOT dispose of the battery in a fire. The battery
may explode.
7