UPS Mode
Overload
in Battery
Mode
NOTE:
If backlight shuts off, you may activate it by touching the
screen.
3
Installation
The UPS can protect your equipment from all power problems
such as surge, blackouts, brownouts and line noise. When AC
power is present and the ON/OFF switch is turned ON, the
UPS is always charging the battery and provides power to the
equipment from AC line directly. A reliable built-in battery
can provide stable power in order for you to complete your
work, save your data and safely shut down your system when
there is a utility power blackout.
The UPS is simple to operate and install. Please read the
following steps before connecting any equipments to this UPS:
6
LCD Display
icon will flash
Description
When overload
occurs, alarm will
beep every 0.5
seconds.