9.33.2
Mounting
Mounting the box terminal block
The following figures show how to mount and disassemble the box terminal block onto
the 3RT1.6 / 3RT1.7 contactor in sizes S10 / S12.
Mounting the box terminal block onto the 3RT1.6 / 3RT1.7 contactor
①
②
Disassembly of the box terminal block from the 3RT1.6 / 3RT1.7 contactor
①
②
③
SIRIUS - SIRIUS 3RT Contactors/Contactor assemblies
Manual, 09/2017, A5E03656507120A/RS-AE/006
Mount the box terminal block on the contactor.
Screw the box terminal block tight on the contactor. Check whether the box terminal block is
fitted firmly.
Position the screwdriver in the middle of the contactor, as shown in the figure.
Slightly lever open the box terminal block to dislodge it.
Detach the box terminal block from the contactor in the upward direction.
9.33 Box terminal block (size S6 to S12)
Accessories
455