Table of Contents
Advertisement
Configuration
6.3 Operating mechanism system / coil selection 3RT contactors and 3RH2 contactor relays
Control via relay outputs
Control via relay outputs, e.g. of:
● PLC
● SIMOCODE
The contactor can be controlled using relay outputs via the terminals H1/H2. The relay
contacts are loaded with approx. 5 mA and the control supply voltage applied to A1/A2.
Note
H2 and A1 are internally connected and are therefore on the same voltage potential.
①
②
③
④
/
S1
S2
82
Electronic module for 3RT1...-.P contactor
Plug-in connection, 7-pin
Remaining lifetime signal 20 %
Changeover switch from automatic control, e.g. via SIMOCODE or PLC relay output, to local
control
Local control option
SIRIUS - SIRIUS 3RT Contactors/Contactor assemblies
Manual, 09/2017, A5E03656507120A/RS-AE/006
Hide quick links:
Advertisement
Table of Contents
