Mounting
7.2 Mounting
Mounting / disassembling sizes S2 (snap-on mounting)
Size S2 contactors can be snapped onto a 35 mm DIN rail according to IEC 60715.
①
Disassembling size S2
①
②
/
③
186
Position the device on the top edge of the mounting rail and press it down until it snaps onto
the bottom edge of the rail.
To disassemble, press the locking device down with a screwdriver.
Press the device down, pushing against the mounting springs, and swivel the device to
remove it.
SIRIUS - SIRIUS 3RT Contactors/Contactor assemblies
Manual, 09/2017, A5E03656507120A/RS-AE/006