Accessories
9.3 Auxiliary switch blocks
9.3.1.4
Mounting/Disassembly
The procedures for mounting and disassembling auxiliary switch blocks for mounting on the
front and laterally are described below.
Mounting the front-side 2- / 4-pole auxiliary switch block (sizes S00 / S0 / S2 / S3)
The following illustration shows an example of mounting size S00.
Sizes S0 / S2 / S3 are mounted in the same way.
①
284
Push the auxiliary switch, which can be mounted on the front, into the location hole on the
contactor. Pull it down until it engages.
SIRIUS - SIRIUS 3RT Contactors/Contactor assemblies
Manual, 09/2017, A5E03656507120A/RS-AE/006