9.3.2.4
Mounting/Disassembly
The procedures for mounting and disassembling auxiliary switch blocks for mounting on the
front and laterally are described below.
Mounting the front-side 2- / 4-pole auxiliary switch block
①
Disassembling the front-mounted auxiliary switch - 2- / 4-pole auxiliary switch block
①
②
Note
The procedure for mounting/disassembling the 1-pole auxiliary switch block on the front is
the same.
SIRIUS - SIRIUS 3RT Contactors/Contactor assemblies
Manual, 09/2017, A5E03656507120A/RS-AE/006
Push the auxiliary switch, which can be mounted on the front, into the location hole on the
contactor. Pull it down until it engages.
Activate the release lever on the auxiliary switch block.
Push the auxiliary switch block up and pull it forward to remove it from the contactor.
Accessories
9.3 Auxiliary switch blocks
293