Siemens SIRIUS 3RT Manual page 379

Mounting the reversing contactor assembly with spring-loaded connection - size S2
The illustrations below show the components of the assembly kit for the reversing contactor
assembly in size S2, and they explain the assembly procedure. The mechanical interlock
and the connecting clips are mounted in the same way as described for size S2 with screw-
type connection.
①
②
③
④
⑤
SIRIUS - SIRIUS 3RT Contactors/Contactor assemblies
Manual, 09/2017, A5E03656507120A/RS-AE/006
9.26 Assembly kit for reversing contactor assemblies (sizes S00 to S3)
Attach the wiring modules for connecting the main current paths to the contactors from above
(a).
Attach the wiring modules for connecting the main current paths to the contactors from below
(d).
Screw the wiring modules tight with a screwdriver.
To connect the control current paths (b), push the conductors into the contactor terminals.
To connect the control current paths (c), push the conductors into the contactor terminals.
Accessories
379