Dimension Drawings - Siemens MASTERDRIVES MC 1FK7 Configuration Manual

Dimension Drawings

Table 6-1: Introduction
Note
Using a configuration interface that is very easy to understand, CAD CREATOR allows you to
quickly find motor-specific
- dimension drawings
- 2D/3D CAD data
and supports you when generating plant/system documentation regarding project-specific
information and parts lists.
Internet: www.siemens.com/cad-creator
Note
Siemens AG reserves the right to change the dimensions of the motors as part of mechanical
design improvements without prior notice. This means that dimensions drawings can go
out-of-date. Up-to-date dimension drawings can be requested at no charge from your local
SIEMENS sales department.
1FK7 Synchronous Motors
Configuration Manual (PFK7), 10/2005 Edition, 6SN1197-0AD06-0BP1
6
6-1