Table of Contents
Advertisement
ESDS instructions
Caution
An electrostatic-sensitive device (ESDS) is an individual component, integrated circuit, or
module that can be damaged by electrostatic fields or discharges.
ESDS regulations for handling boards and equipment:
When handling components, make sure that personnel, workplaces, and packaging are well
earthed.
Personnel in ESD zones with conductive floors may only touch electronic components if they
are
– grounded through an ESDS bracelet and
– wearing ESDS shoes or ESDS shoe grounding strips.
Electronic boards should only be touched if absolutely necessary.
Electronic boards must not come into contact with plastics or items of clothing containing
synthetic fibers.
Electronic boards may only be placed on conductive surfaces (table with ESDS surface,
conductive ESDS foam rubber, ESDS packing bag, ESDS transport containers).
Electronic boards may not be brought close to data terminals, monitors or television sets.
(minimum clearance >10 cm).
Measurements may only be carried-out on electronic boards and modules if
– the measuring instrument is grounded (e.g. via a protective conductor) or
– before making measurements with a potential-free measuring device, the measuring head
is briefly discharged (e.g. by touching an unpainted blank piece of metal on the control
cabinet).
Standards, regulations
1FK7 Synchronous Motors
Configuration Manual (PFK7), 10/2005 Edition, 6SN1197-0AD06-0BP1
The appropriate standards, regulations are directly assigned to the functional
requirements.
Foreword
vii
Advertisement
Table of Contents
