Siemens MASTERDRIVES MC 1FK7 Configuration Manual page 8

Synchronous motors

Table of Contents

Foreword

Caution

Motors should be connected-up according to the circuit diagram provided. They must not be

connected directly to the three-phase supply because this will damage them.

SIMODRIVE and SIMOVERT MASTERDRIVES drive units with AC motors are subject, as

part of the type test, to a voltage test corresponding to EN 50178. According to EN 60204-1,

Section 19.4, while electrical equipment of industrial machines are being subject to a voltage

test, all of the SIMODRIVE and SIMOVERT MASTERDRIVES drive unit connections must be

disconnected/withdrawn in order to avoid damaging the SIMODRIVE and SIMOVERT

MASTERDRIVES drive units.

Note

SIMODRIVE and SIMOVERT MASTERDRIVES drive units with motors fulfill, when opera-

tional and in dry equipment rooms, the Low-Voltage Directive 73/23/EEC.

SIMODRIVE and SIMOVERT MASTERDRIVES drive units with motors fulfill, in the configura-

tions specified in the associated EC Declaration of Conformity, EMC Directive 89/336/EEC.

Table -3:

ESDS information and instructions

Configuration Manual (PFK7), 10/2005 Edition, 6SN1197-0AD06-0BP1

1FK7 Synchronous Motors

Table of Contents

Simodrive 611