Deceleration Rate; Quick Start; Taper Rate; Speed Parameters - Curtis 1244 User Manual

3 — PROGRAMMABLE PARAMETERS
24
The programmable parameters are described in the following order. They
are listed in the text by the abbreviated names that are displayed by the pro-
grammer. Not all of these parameters are displayed on all controllers; the list
for any given controller depends on its specifications.
There are additional parameters that can only be configured at the factory.
The manufacturer can specify how these parameters will be configured, but they
are not programmable using the programmer. See Section 4: OEM Specified,
Factory Set Parameters.
Acceleration Parameters
Acceleration Rate, M1–M4
Braking Rate, M1–M4

Deceleration Rate

Quick Start

Taper Rate

Speed Parameters

Maximum Speed, M1–M4
Creep Speed, M1–M4

Regen Speed

Throttle Parameters

Control Mode

Throttle Type

Throttle Deadband

Throttle Maximum
Throttle Map, M1–M4
Throttle Braking Percent, M1–M4
Current Limit Parameters
Drive Current Limit, M1–M4
Braking Current Limit, M1–M4

Minimum Field Current Limit

Maximum Field Current Limit

Restraint

Emergency Reverse Current Limit

Current Ratio

Curtis 1244 Manual,
Rev. E