Navigating To A Waypoint; Start Navigating To A Waypoint - Raymarine C Series Reference Manual

32

3.4 Navigating to a waypoint

This section explains how to start and stop navigating to a waypoint. When you
navigate to a waypoint or to the cursor position, the data is sent on NMEA 0183 and
SeaTalk and can be used by an autopilot, if connected. For more information on
navigation, see

Start navigating to a waypoint

...using the cursor
To navigate to a waypoint using the cursor, when a chart or radar application is active:
...via the WPTS MOB button
To navigate to a waypoint using the WPTS/MOB button when any application is active:
WPTS/
MOB
.... by selecting the GOTO option
You can navigate to a waypoint using the GOTO option when a chart application is
active and the top level chart soft keys are displayed:
GO TO ...
page 56
.
You can navigate to a waypoint using the cursor, via the
WPTS MOB button or by selecting the GOTO option.
Once navigation is active, the waypoint symbol is
surrounded by a box and a dashed line appears between
your boat and the waypoint.
If required you can display navigation details for the
active waypoint in the data bar (see
WPT
Position cursor over
waypoint to go to.
GOTO WAYPOINT
OPTIONS ...
GOTO WAYPOINT
OPTIONS...
Or
GOTO CURSOR
C-Series Display Reference Manual
GO TO WAYPOINT
Waypoint List
Select required waypoint
Waypoint List
Select required waypoint
page 180
).
GOTO WAYPOINT
GOTO WAYPOINT