Local Ais Alarms; Active Alarm List - Raymarine C Series Reference Manual

Chapter 11: Automatic Identification System (AIS)

Local AIS alarms

When the connected AIS unit generates an alarm, your C-Series displays a local alarm
message and indicates the alarm status in the data bar icon:
4nm
To proceed:
1. Remove the message pop-up/display active alarm list:
REMOVE
MESSAGE
Removes pop-up and
adds alarm to AIS
Alarm List.
2. Acknowledge the message at your AIS unit.
Important: An alarm remains active until it is acknowledge on the AIS unit.

Active alarm list

The active alarm list shows the status of each local alarm. This list can either be
accessed via the AIS Layer Setup Menu (see
page 187
(see
Note: The local AIS alarms must be acknowledged at the AIS receiver. Removing the
message or adding it to the Alarm list on your C-Series display does not cancel the
alarm.
North-Up (Relative Motion)
AIS Local Alarm
"AIS message"
This alarm must be acknowledged on your
AIS Receiver.
To remove this message press REMOVE
MESSAGE.
VIEW AIS
ALARM LIST...
Or
Removes pop-up, adds alarm to and displays AIS Alarm List
).
REMOVE VIEW AIS
MESSAGE ALARM LIST...
page 176
) or from the Alarms Setup Menu
175
AIS Alarm
active icon
Local
AIS message