Fishfinder Alarms; Setting Up Your Fishfinder - Raymarine C Series Reference Manual

110

5.7 Fishfinder alarms

In addition to the system alarms (see
you are connected to a DSM or when the simulator is on:
• Fish Alarms - sound when a target meets the specified sensitivity level and, is
within the depth limits (if enabled). The greater the fish alarm sensitivity, the
greater the number of target image depths displayed.
• Shallow/Deep Alarms - sound when the DSM detects that the depth is less than
the shallow limit, or greater than the deep limit.
You can switch the alarms on, set the limits and specify the fish alarm sensitivity as
described on

5.8 Setting up your fishfinder

The set up for your fishfinder can be changed from the standard configuration to suit
your particular needs. The Fishfinder Setup Menu is divided into three sections:
• Display settings.
• Transducer settings.
• DSM settings.
To select the Fishfinder Setup Menus:
MENU
For general information on the Setup Menus, see page 183.
Note:
page 188
.
Setup
Fishfinder Setup...
GPS Setup...
Compass Setup...
Enter Fishfinder
Setup menu
C-Series Display Reference Manual
page 187
), the following alarms can be set when
Fishfinder Setup Menu
Depth Digit Size
Depth Digit Position
Target Depth ID
Depth Lines
Color Palette
Scroll
Manual Scroll Speed
Select Transducer
Select Speed Transducer
Depth Offset (Waterline)
Depth Offset
Temperature Offset
Frequency Calibration...
DSM Reset...
Trip Counter Reset...
SONAR interference Rejection
2nd Echo Interference Rejection
Ping Rate Limite (per sec.)
Ping Enable
Select required function
LARGE
BOTTOM
OFF
Display
OFF
settings
Copper
MANUAL
100%
P65/P66
UNKNOWN
Transducer
0.0ft
settings
100%
0
0.0 F
Auto
DSM
OFF
settings
30