Raymarine C Series Reference Manual page 168

154
Selecting cell data
To select the data that is to appear in each cell:
1. Select the data group for the relevant panel e.g.
e.g.
Press and hold
relevant soft key
2. Select the data to be inserted in the highlighted panel:
Changing the size of the cells
You can change the size of the cells to meet your own particular requirements by using
the MERGE CELLS or SPLIT CELL function.
Splitting a cell
Use the SPLIT CELL function to create two smaller data cells:
1. Select the relevant cell within the required panel:
e.g.
Press and hold
relevant soft key
The direction in which the selected cell can be split is indicated on the soft key.
2. Split the highlighted cell:
SAILING
Data
Pressure
Air Temp
Sea Temp p
Set Drift
Highlight
required data
Select data
NAVIGATION
SELECT DATA...
Numeric
Graph - 1 Second Interval
Graph - 10 Second Interval p
Graph - 1 Minute Interval
Graph - 5 Minute Interval
Select format
(if applicable)
e.g.
Heading Speed
0
296 T 20.0kt
Trip
13.85nm
Active cell highlighted
C-Series Display Reference Manual
Data Groups
Vessel
Navigation
Depth
Environment
Wind
Time and Date
Engine
Highlight data
group
Select data group
OK
e.g.
Heading Speed
0
296 T 20.0kt
Trip
13.85nm
Move highlight
to relevant cell