Raymarine C Series Reference Manual page 79

Chapter 4: Using the Chart
Follow using the cursor
You can either use the cursor to select and follow a route from the start of the route or
from a selected waypoint within the route.
... from the start of the route
... from a selected waypoint within the route
Follow using the route list
This option directs you to the start of the route that you have selected on the route list
and then follows it:
GOTO...
ROUTES...
Follow in reverse order
This option reverses the waypoint order (i.e. the last waypoint of the original route is
now the first) and renumbers the waypoints accordingly. The route name moves to the
reassigned first waypoint and then the system automatically activates the reverse-
follow route function.
GOTO...
ROUTES...
To stop following an active route at any time, press
Note:
Position cursor over any
leg of required route
Position cursor over
appropriate waypoint
FOLLOW ROUTE
Or:
OPTIONS...
FOLLOW ROUTE
Or:
OPTIONS...
FOLLOW THIS
ROUTE
FOLLOW FROM
HERE
Route List
Color Name
---- Quick Route
---- Route 1
---- Route 2
---- Route 3
Select route to To start follow route
follow
Route List
Color Name
---- Quick Route
---- Route 1
---- Route 2
---- Route 3
Reverse-follow
Select required
route starts
route
STOP FOLLOW
65
FOLLOW ROUTE
REVERSE AND
FOLLOW
.