Editing The Selected Route - Raymarine C Series Reference Manual

Chapter 4: Using the Chart

Editing the selected route

Once you have selected the appropriate route (see previous section) you can proceed
to edit it.
Reversing a route
You can reverse the course of a route:
3
For details of how to reverse and immediately follow a route, see page 65.
Note:
Changing the course of a route
You can amend the course of a route by:
• Adding a waypoint to the beginning or end of the route or between two existing
waypoints.
• Moving a waypoint within a route.
• Removing a waypoint.
You can effect these changes either via the Make Route dialog box or by selecting the
route on screen and then using the appropriate soft keys (not applicable when adding
a waypoint at the beginning of a route).
You will not be able to edit the waypoint that you are currently navigating to
Note:
(target waypoint).
Add a waypoint at the beginning of a route
This option changes the course of a route by adding an existing waypoint to the start of
the route:
1. Select the appropriate route for editing (see
2. Display the Make Route screen:
4
2
1
BayView
Select appropriate
route with cursor
AMEND ROUTE
COURSE...
REVERSE ROUTE
page 68
USE WAYPOINT
LIST...
BayView
1
3
2
4
Waypoints renumber
and route name moves
).
Make Route
Waypoints Sunday tour
Harbour Ent. 01 Midchannel
Midchannel 02 Outer Harbour
Outer Harbour 03 Harbour Ent.
Pierhead
Waypoint 4
0 0
50 16'.75N 50 47'.356N
0 0
001 6'.095W 001 6'.604W
The Make Route screen is displayed
69