Chart Cards; Uses Of The Chart Application - Raymarine C Series Reference Manual

44

Chart cards

To use your C-Series Display as a navigation aid, charts with the appropriate level of
detail for the geographic area you wish to navigate are required. The charts are
available in electronic format on Navionics Chart cards. Details of these cards and how
to obtain them is given on
When archiving data, Raymarine recommends that you only use SanDisk brand CF
memory cards. Other brands of CF memory cards may not work in your C-Series
Display.

4.2 Uses of the chart application

Once the heading and position data is available you can use your chart to:
• Find out where you are (see
• Interpret your surroundings (see
• Measure the distance and bearing between two points (see
• Place waypoints at specific locations (see
• Navigate to a specific point (see
• Build and follow a route (see
• Monitor where you are going (see
• Distinguish between fixed and moving objects using radar overlay (see
• Record where you have been (see
• Manage and edit routes and tracks (see
• View AIS data (see
Facilities are also provided to customize your chart application to your own particular
requirements and circumstances. You can:
• Alter the way the chart is drawn in relation to your boat and the direction you are
travelling in (chart orientation and motion mode).
• Manage and edit chart data you have entered.
• Control the level of detail displayed on-screen.
To change the data displayed in the data bar at the top /side of the screen,
Note:
please refer to page 179.
page iii
.
page 46
).
page 47
page 56
page 59
).
page 74
page 78
page 68
page 54
).
C-Series Display Reference Manual
).
page 55
page 56
).
).
).
).
page 81
and ).
).
page 76
).