Raymarine C Series Reference Manual page 76

62
2. Select and insert the first waypoint in the new route:
Waypoints
Crag Rock
Sandy Bay
3. Continue entering waypoints until your route is complete.
If you make an error, you can delete the waypoint from the new route list (for
Note:
details see page 63).
Building a route on-screen and via the waypoint list
You can build your route using both the on-screen and the waypoint list methods
described on the previous pages. This will necessitate alternating control between the
Make Route dialog and the chart.
Changing control
Chart to Make Route dialog
Make Route dialog to chart
Making changes to the route being built
If you make an error whilst building a route you can:
• Undo the last waypoint (on-screen route build only).
• Delete a waypoint from the new route list (waypoint list route build only).
• Abandon the route build.
Undoing the last waypoint
To remove the last waypoint when you
are building a route on-screen:
ROUTES...
Make Route
New Route
Blyth Bay
Highlight required
waypoint
Make Route
Waypoints New Route
Crag Rock 01 Sandy Bay
Blyth Bay 02 Crag Rock
03 Rush Creek
Sandy Bay
C-Series Display Reference Manual
BUILD NEW
ROUTE
INSERT
WAYPOINT
USE WAYPOINT
LIST...
USE CURSOR.....
USE WAYPOINT
LIST
Make Route
Waypoints New Route
Crag Rock 01 Sandy Bay
Blyth Bay
Sandy Bay y y
Waypoint added to New Route.
Make Route
Waypoints New Route
Crag Rock 01 Sandy Bay
Blyth Bay 02 Crag Rock
Sandy Bay 03 Rush Creek
UNDO WAYPOINT