Compass Setup; Display Setup - Raymarine C Series Reference Manual

Chapter 12: System setup and customizing
Selecting the COG/SOG filter
The COG/SOG filter should be set to the level appropriate to your boat's use and to the
level of oscillation being experienced by the GPS:
• HIGH - for use when trawling or when there is a high level of oscillation.
• MEDIUM - for general use
• LOW - for use when travelling at speed

Compass Setup

This option can be used to linearize a Raymarine ST80 active compass or Smart
Heading sensor connected on SeaTalk. To linearize ('swing') your compass proceed as
follows:
1. Select the LINEARIZE COMPASS option:
MENU
2. When instructed to align heading:

Display Setup

MENU OPTION
Soft key Autohide
Controls whether the soft key bar is automatically hidden if
not used for a period of 10 seconds. Pressing any key re-
displays the soft key bar.
Cursor Autohide
Controls whether the cursor is automatically hidden if not
used for 10 seconds. Pressing any key re-displays the cursor.
Setup
Radar Setup...
GPS Status...
Compass Setup...
System Setup...
Highlight Compass
set up
Select Compass set up
ALIGN HEADING
LINEARIZE
Follow on screen
COMPASS
Turn one click at a time
to fine tune heading
OPTIONS
(Default in bold)
OFF
ON
OFF
ON
191
instructions