Initial Setup Procedures - Raymarine G Series Quick Reference

Number Description
1 Nav Station 1 (flybridge)
2
Nav Station 2 (bridge)
3 Below-decks components (for example, GPM processor unit,
GVM video module)
Refer to the installation instructions for information on planning and
configuring the Nav Station(s) for your system.
Assigning a keyboard to a nav station
1. Press the MENU button.
2. Select System Setup.
3. Select System Configuration.
4. Select Assign Keyboards.
5. Select the appropriate keyboard from the list.
6. Select the ASSIGN TO NAVSTATION softkey.
7. Select the appropriate Nav Station.
Assigning a keyboard to an individual monitor
1. Press the MENU button.
2. Select System Setup.
3. Select System Configuration.
4. Select Assign Keyboards.
A list of available keyboards is displayed.
5. Select the appropriate keyboard from the list.
6. Select the ASSIGN TO MONITOR softkey.
7. Select the appropriate monitor.
6

Initial setup procedures

A number of tasks should be completed before you use your system
for the first time.
Once your system has been installed and commissioned (see
Installation instructions), Raymarine recommends that you:
• Set the language, the date and time format and preferred units
of measurement.
• Set your vessel details.
• Adjust the display brightness.
• Designate the data master (master GPM).
• Select the GPS data source.
• Familiarize yourself with the Simulator Mode.
Setting the language, time / date, and units of
measurement
1. Press the MENU button.
2. Select System Setup.
3. Select Language.
4. Select the appropriate language from the list.
5. Select Time / Date Setup.
6. Use the Date Format and Time Format menu items to adjust
the date and time.
7. Use the Cancel button to return to the System Setup menu.
8. Select Units Setup.
9. Make the appropriate changes using the menu items in the Units
Setup Menu.
Setting your vessel details
1. Press the MENU button.
2. Select System Setup.
G-Series Quick reference