Keysight E8267D User Manual page 303

Peripheral Devices
N5102A Digital Signal Interface Module
This accesses the UI (first-level softkey menu shown in
used to configure the digital signal interface module. Notice the graphic in the
PSG display showing a setup where the N5102A module is generating its own
internal clock signal. This graphic changes to reflect the current clock source
selection.
Figure 12-9 First-Level Softkey Menu
Choosing the Logic Type and Port Configuration
Figure 12-10 Logic and Port Configuration Softkey Menus
1. Refer to
Keysight E8357D/67D & E8663D PSG User's Guide
Line is grayed out until the N5102A module interface is turned on
Figure 12-10. Press the Logic Type softkey.
From this menu, choose a logic type.
Figure 12-9) that is
289