Sartorius ME215 Operating Instructions Manual page 13

§
Remove the following parts from the recessed spaces at the top of the
inner packaging:
– AC adapter (in cardboard packaging)
– Weighing pan
– Shield plate
§
Remove the two padding blocks that make up the inner packaging by pulling outward.
§
Remove the shield disk (included with ME235S/P models only) and dust cover.
§
Remove the retainer securing the front draft shield panel.
§
Open the plastic wrapping.
§
Place one hand under the display and control unit and the other under the back of the
balance and lift the balance out of the lower packaging.
13